Phase 1 // Pre-order // Founder pricing

Weight off your back.

The first tool vest engineered for inspectors to wear on site. Every instrument in the same spot on every job, so you reach without looking, close the file faster, and never walk back to the truck for the one thing you left there.

Reserve my vest Outfit a crew

0UNITS RESERVED

$175FOUNDER PRICE LOCKED

$0DUE TODAY

Made in the USA // built by American workers

Inspector wearing the InspectorVest, load spread across the shoulders and torso

LOAD MAP // WEIGHT DISTRIBUTION LIVE LOAD SPREAD // SHOULDERS Move to scan the load

NONELOAD CARRIED

Scroll to run the diagnostic

[ Field data // where the weight goes ]

Not a carpenter vest with a new label.

Inspector on a ladder, the load spread across the padded shoulders and the full mesh back panel

Load spread // padded shoulders + torso

A carpenter vest drops 20 pounds of nail bags onto your hips. Inspectors carry light, dense instruments. The fix is not less gear. It is spreading the load evenly across padded shoulders and the torso — breathable, balanced, and off your lumbar spine — instead of hanging it off your belt.

0hrs/wk

Average time an inspector spends on their feet in the field. For approval

Report recurring lower-back or hip strain from belt-carried loads. For approval

0lb

Instruments on a typical full inspection, once belted and pouched. For approval

[ Spec.02 // the other half of the story ]

The other half is what it does for your income.

Inspectors and adjusters get paid per inspection, not per hour. Every minute spent digging through a bag — or driving back for the flashlight you left on a roof — comes straight off your paycheck.

A tool belt fails exactly where you spend your day. It shifts on a roof, snags in a crawlspace, so you unclip it and set your tools down — and that is how they get left behind. The vest gives every tool one spot that never changes. You reach without looking and put it back without thinking.

25hours back, per 100 houses

15 min per job
× 100 houses on a storm deployment
= 1,500 minutes
= 25 hours

Two and a half extra 10-hour days per 100 houses. On a three-week deployment, half a week back.

[ What the 15 minutes is made of ]

Walk back to the truck for gear2 min
Harness on, buckles adjusted, straps set2 min
Tool belt loaded, pouches checked2 min
Camera, tablet, moisture meter staged2 min

Ladder gear staged2 min
Reverse all of it at the end of the job2 min
Re-trips for what got left in the truck2 min
Seven touchpoints, two minutes each14 min

Which is why 15 is the conservative number, not the optimistic one. Swap in our timed figure

[ Sensitivity // the case does not depend on the best case ]

If it is really 10 min a job

16.7

hours saved per 100 houses. Still better than a day and a half back.

At 15 min a job

25.0

hours saved per 100 houses. Two and a half ten-hour days.

If it is really 20 min a job

33.3

hours saved per 100 houses. More than three full days.

Run it on your own numbers

Illustrative // nothing here is a promise

Minutes saved per job, gear on and off 15 min

Houses on the deployment 100

On-site time per job, plus drive 80 min

Close rate on an inspection 30%

Average job value $10,000

25.0Hours back on this deployment

18Extra inspections, drive time included

2.5Ten-hour working days recovered

$54,000Added revenue at your close rate

Extra inspections are costed on the full job cycle including drive, which is why the figure lands nearer 18 to 20 than a flat 25. Revenue runs those inspections through your own close rate, because an inspection is a lead, not revenue.

[ And most of the year is not storm ]

Three jobs a day, 15 minutes each: 150 to 180 hours a year, per inspector. On a five-person crew, more than a hundred working days.

45 min/day
× 240 working days
= 180 hours — call it 150

More inspections per week, less back pain at the end of them.

[ Spec.03 // every pocket, documented ]

Every pocket, mapped to an instrument.

InspectorVest front, every pocket mapped

NODE STATUS
READING

POCKET 06

Padded mesh shoulders

> Padded, breathable, load-bearing

Padded and breathable, so it never cooks. The shoulder and torso harness spreads the load evenly rather than stacking it on one point, which is exactly why it stays comfortable through the last inspection of the day.

[ What we have in mind for it ]

Interior shot // to be photographed

Tap a node to read the pocket

175

[ The launch build ]

The Field vest.

$175 founder price // locked at reservation

01Two mirrored chest pockets. Pens, chalk, camera, ID. The same set either side, so left and right hands both win.
02Flat document sleeve. Clipboard, tablet or report pad up to 11 inches, riding flat.
03Two deep tool pockets. Disto laser measure and the bulky items. The lid tucks in for speed.
04Tape measure pouch. On the front, where your hand already is. Never on your belt.
05Two back mesh glove pockets. Shove wet gloves in and keep going. They stay breathable.
06Padded mesh shoulders, full mesh back. Load spread evenly, airflow for attic and crawlspace heat.
07Quick-release waist strap. One pull to drop it. Harness-friendly.
08Made in the USA. Cut and sewn domestically, supporting American workers.

Hi-Vis version coming soon.

Reserve the Field

[ Build // construction, up close ]

The actual build.

01 // Chest

Logo and pockets

Back of the vest, two mesh glove pockets either side of the centre panel

[ Spec.04 // one platform, four rigs ]

One vest. Every job.

A belt built for roof work is the wrong tool in a crawl space, so adjusters end up owning three or four setups and burning time swapping between them at every stop. InspectorVest makes the vest the platform: it goes on at 7 a.m. and comes off at 5 p.m. What changes is the rig attached to it.

Platform // stays on

It carries the load across your shoulders and torso instead of hanging it off your lumbar spine. It identifies you as the professional the moment a homeowner opens the door. It is comfortable enough to drive in, so it never has to come off between sites. And it is the same recognisable silhouette whether you are on a roof, in an attic, or on your belly under a floor joist.

Chalk line
Shingle gauge and shingle lifter
Marking crayon
Pitch gauge, tethered
Tape measure
Phone or camera, chest position

Low profile by design, so nothing catches a ladder rung or a rake edge. Harness-compatible, with attachment points that sit clear of a D-ring. Tethered tool loops so a pitch gauge or a shingle lifter does not roll off a valley. Sized so the camera sits in a chest position you can reach without changing your stance.

Moisture meter
Thermal camera
Borescope
High-output light
Glove and respirator storage

Everything sits flat or rides high so you can belly-crawl without pockets digging into your ribs. Wipeable, hose-off materials, because this rig is coming out of a wet crawl space covered in whatever was down there. Nothing dangles and nothing snags on a vapour barrier.

Tablet or clipboard carry, front
Flashlight
Tape measure
Laser measure
Card storage

Trimmer and quieter than the field rigs, because this one is worn standing three feet from a homeowner in their living room. Everything you need for a contents walk-through and nothing that reads as heavy equipment.

Non-contact voltage tester
Multimeter
Inspection mirror
Driver set
Receptacle tester

Laid out so you can work one-handed while the other hand holds a panel cover. Every item lands in the same place every time, which matters most when you are not looking at what you are reaching for.

The lineup can grow. The platform does not change. Rig lineup for approval

[ Why this matters to an adjuster ]

A full gear change costs five to ten minutes on each end — strip the last rig off, dig the right one out of the back, put it on, check it, then reverse all of it when you leave. Run seven stops and you have lost close to an hour standing in driveways. With swappable rigs it is one change at the tailgate.

Faster in and out at every stopMore files per day
Fewer trips back to the vehicleTool is already on you
No lost tools between setupsRig lives in a known place
Less fatigue at the end of the dayFile quality holds
Swap time, at the tailgateUnder a minute

The seventh inspection gets the same attention as the first, which matters for accuracy and for the quality of the file you turn in.

[ Fleet // outfit the crew ]

The ROI of a field team that isn't in pain.

For carriers and inspection firms outfitting adjusters and staff inspectors. Volume pricing, carrier co-branding embroidered across the back panel, harness compatibility, and domestic manufacturing.

Fewer strain injuries

Spread the load across the whole crew and cut recurring back and hip claims.

Faster workflow

A mapped pocket per instrument means less fumbling and fewer re-trips per inspection.

Harness compatible

Cut clearance for fall-protection harnesses on steep and roof work.

Carrier co-branding

Your firm or carrier mark embroidered across the back panel. Preview it in the form below.

Season-proof supply

Secure units ahead of CAT surges so staffing spikes never wait on gear.

Volume tiered pricing

Per-unit pricing steps down by team size. Reserve the run now to hold the tier.

Made in the USA // domestic cut and sew

[ Reserve // lock founder pricing ]

Reserve yours.

No payment today. Lock the $175 founder price and your place in the Phase 1 run.

Name

Phone (optional)

Role

Quantity

Type any number. Reserving for a whole agency? Put 2,000 in and we will come back with a fleet quote.

Fleet order // 100+ units

Back-panel branding unlocked

Company name

Back-panel embroidery text

Back of vest only, up to 28 characters. Chest embroidery is quoted separately.

The preview updates as you type, and shows the real placement on the upper back panel. Send vector logo files after you reserve and we will proof the stitch file before the run.

Made in the USA

YOUR COMPANY NAME

EMBROIDERY ZONE // UPPER BACK PANEL

1 x Field // $175 // no card required. We email you at launch to complete payment.
Hi-Vis version coming soon — reserve the Field now and you can switch your order at launch.

Confirmed

Reservation IV-00000

Check your email. Your founder price is locked and your spot in the Phase 1 run is held.